| WeChat: 13860435534 | Home | InSite Search | About Us | Contact Us |
|
|
|
|
|
|
||||
about A column reinforced plate drawing dies, about C reinforced plate flanging shaping moulds, after around floor beams, after floor right girder drawing dies, around front of left plate drawing dies, beam drawings, car doors, car short axis prototypes, cold stamping parts, cowl panel drawing dies, door edge dies, draw dies Of roof, floor mounted welding fixtures, frame rails, front circumferences, fuel fillers, lateral angles, left and right front fenders, left rear wheel cover drawing dies strengthen, light truck cab coamings, longerons, open front door to strengthen boards, punching dies side section of left and right A column, side enclosed dies, sports car prototypes, van beams, welding fixtures, wheel casings.
 About A Column Reinforced Plate Drawing Die |
 About C Reinforced Plate Flanging Shaping Mould |
 After Around Floor Beam |
 After Floor Right Girder Drawing Die |
 Around Front Of Left Plate Drawing Die |
 Beam Drawing |
 Car Door |
 Car Short Axis Prototype |
 Cold Stamping Parts 01 |
 Cold Stamping Parts 02 |
 Cold Stamping Parts 03 |
 Cold Stamping Parts 04 |
 Cold Stamping Parts 05 |
 Cold Stamping Parts 06 |
 Cold Stamping Parts 07 |
 Cold Stamping Parts 08 |
 Cold Stamping Parts 09 |
 Cold Stamping Parts 10 |
 Cold Stamping Parts 11 |
 Cold Stamping Parts 12 |
 Cold Stamping Parts 13 |
 Cold Stamping Parts 14 |
 Cold Stamping Parts 15 |
 Cold Stamping Parts 16 |
 Cold Stamping Parts 17 |
 Cold Stamping Parts 18 |
 Cold Stamping Parts 19 |
 Cold Stamping Parts 20 |
 Cold Stamping Parts 21 |
 Cold Stamping Parts 22 |
 Cold Stamping Parts 23 |
 Cold Stamping Parts 24 |
 Cold Stamping Parts 25 |
 Cold Stamping Parts 26 |
 Cold Stamping Parts 27 |
 Cold Stamping Parts 28 |
 Cold Stamping Parts 29 |
 Cold Stamping Parts 30 |
 Cold Stamping Parts 31 |
 Cowl Panel Drawing Die |
 Door Edge Die |
 Draw Die Of Roof |
 Floor Mounted Welding Fixture 01 |
 Floor Mounted Welding Fixture 02 |
 Frame Rail |
 Front Circumference 01 |
 Front Circumference 02 |
 Fuel Filler |
 Lateral Angle |
 Left And Right Front Fender |
 Left Rear Wheel Cover Drawing Die Strengthen |
 Left Rear Wheel Cover Drawing Die Strengthen 02 |
 Light Truck Cab Coaming |
 Longeron 01 |
 Longeron 02 |
 Open Front Door To Strengthen Board |
 Punching Die Side Section Of Left And Right A Column |
 Roof Check 01 |
 Roof Check 02 |
 Side Enclosed Die 01 |
 Side Enclosed Die 02 |
 Side Trimming Die For Front Panel |
 Single Row Cover |
 Sports Car Prototype 01 |
 Sports Car Prototype 02 |
 Top Cap |
 Trimming And Piercing Die For Top Cover 01 |
 Trimming And Piercing Die For Top Cover 02 |
 Van Beam |
 Welding Fixture |
 Wheel Casing |
|
Mimpex Mould, China is a professional mould manufacturer especially on designing and producing injection moulds.
| Copyright © Mimpex@RPM Since 2002 www.mouldimpex.com Sitemap Xiamen RPM Imp.&Exp. Co.,Ltd. |
